Although this way is easiest. pressure-treated boards probably will vary greatly in moisture content and often will shrink unevenly. In the case of preservative-treated wood. We recommend KDAT lumber. when available. because many problems that eventually surface in deck construction are the result of using wet lumber
Aug 20, 2006 . I am building a deck and I have finished the frame. I wanted to start the decking today but it rained last night and the wood is wet. Can I still build..
Aug 2, 2016 . Now I believe that nails are an inferior fastener when building a deck that gets wet on a regular basis. There's a big difference between a house and a deck. Decks get wet and dry out. The framing lumber in houses, for the most part, stays dry for the entire useful life of the building. The wet-dry cycling that..
Nov 14, 2013 . When installing wet wood decking on decks that will get full sun exposure for more than 25% of the day, I butt the boards tightly against each other, anticipating that they will shrink, creating the required gap. If the deck will be in total shade or will get sun exposure for less than 25% of the day, I gap the..
For additional industry guidance, see www.awc.org/publications/download.php. Make sure that your wood is suited for the intended use. Check the tag on lumber for Above Ground or Ground Contact. Deck Boards. Separate deck boards to allow for expansion and contraction. If heavy and wet, separate boards no
Jan 23, 2013 . Rain during framing is hard to avoid, so how do you know the house is dry enough to move ahead with construction? . Most of the lumber used in my homes is kiln dried (KD), meaning it should arrive to the job site at a moisture content of 12-14%. . I'll show you how to dry a wet house in a future post!HOMETIME HOW TO, Decks - Installing Deck Boards
Spacing Deck Boards If the deck boards are relatively dry, use 16 penny nails to establish the proper gaps between the boards. Proper spacing allows moisture to drain off the deck between the boards. Wood expands when it's wet. If the boards are wet when you install them, you can probably butt them close together..
Pressure treated wood decking is often delivered still wet with preservative. It needs time to dry out before finishing, so the stain will absorb into the wood. How long you need to wait before staining will vary depending on: The moisture content in the wood. Whether the deck is in the sun or shade. The climate and weather..
Deck boards are typically flat-sawn so they are very likely to cup. A good way to remember how wood cups it to imagine that growth rings try to straighten out as a wet board dries. If you install a wet piece of lumber (like most treated decks) with its bark-side up, it will cup to hold water as it dries. However, a dry board moves..
Jun 13, 2016 . Here are some tips to help make sure your deck is awesome. Give Some Space. Appropriate spacing between the decking boards is essential not only for drainage but also to prevent warping. If your decking boards are wet/green (not dried out or seasoned), I'd skip the spacing process altogether because..
Sep 3, 2017 . When buying pressure-treated lumber in the home center, you'll often find that the wood arrives in the store wet. . When building a deck or outdoor project that calls for pressure-treated lumber to be installed with gaps between the wood, you'll likely want to install each board butted against the next board..
A local carpenter is building a deck for my friend and he butted all the boards tightly together. .. If the wood is wet, make the gap small or zero. .. Seriously, the guy I worked with did a lot of bad things, but we always butted PT decking, because, as others have said, it is wet to begin with and will shrink
Hi folks, I need to build a 5'x6' landing with steps and handrails at my mom's house. I picked up the PT material at lowes last night, and as usual it is soaking wet. I've read some varying info on
Danny Lipford: When people are building pressure treated decks, they often ask whether they should space the boards apart or butt them tightly together. The answer really depends on the type of wood you're using. Regular pressure treated wood tends to be somewhat wet when it's new. That means, as it weathers in the..
Jan 25, 2013 . You should consider the project and for things that will be exposed to the weather or high humidity, wet wood is OK, just heavy to work with. Two years of drying . shrink so it splits instead. If the deck boards do warp before installing you can use a couple of wedges to force them straight but it is a PITA
Although this way is easiest. pressure-treated boards probably will vary greatly in moisture content and often will shrink unevenly. In the case of preservative-treated wood. we recommend KDAT lumber. when available. be- cause many problems that eventually surface in deck construction are a result of using wet lum- ber
Most wood sold for deck building is considered wet and has a moisture content of over 30% water weight. Wet wood will shrink as it dries out and is less stable which can cause it to check and warp. It also provides an environment where fungi and bacteria produce rot and for insects to thrive. Dry wood is lighter, easier to..
Pressure-treated lumber can support more weight and span longer distances than cedar, redwood or other woods commonly used for building decks. It's also much less expensive. . The extra weight makes wet decking boards harder to work and to cut, and they shrink when they dry. This means joists can rise up out of..