Jul 26, 2006 . Our pressure treated deck is 36 feet by 12 feet with the boards running in the long direction (parallel to the house). The previous owner ruined the boards so I want to replace them. It occurs to me that I could put 12 foot boards over top of the existing decking and have a seamless deck with the boards..
Set the plank onto the deck, and use a putty knife to slip it under any existing metal flashing. 5. Measure . Fasten the deck board with composite decking screws along the edge closest to house; drive one screw into each joist. 7. . Composite lumber is relatively heavy, and spending all day on your knees is never pleasant
This amazing wood deck restoration project was accomplished by a DIY homeowner and painting contractor using Behr Premium DeckOver . The post includes tips on preparation, application and results with questions from readers answered in the comments
Nov 1, 2008 . Wood on porches can be over 100 years old, and nine out of ten decks my company has worked on weren't flashed to the house (Figure 2). Both of those factors can . In years past, a lot of decks were built with joists 2 feet on center, which is too great a span for most composite or plastic decking. Figure 6
Discover the benefits of both wood and composite decking options for your home. . virgin plastic) and 'extras', such as UV protection and scratch resistant features. In many cases, a composite deck will cost more than a wood deck at the outset but possibly less than a wood deck over time, thanks to minimal upkeep
Resurfacing an existing structure with a high-quality, low maintenance alternative, like decking is doable under the right circumstances. . Wood Framing. Was your deck built with treated wood to start with? If so, it may still have years of life. If not, it is best to start over. However, whether your wood was treated or not, if it..